Quick Start
Get an HT-Edge board blinking and publishing MQTT in under 30 minutes.
- 1. Power — 12 V DC (Standard) or 5 V (Lite/solar). Watch the status LED.
- 2. Network — Ethernet first; Wi-Fi/BT onboard; optional 4G/LoRa miniPCIe.
- 3. Serial console — USB-UART, 115200 8N1, login per BSP notes.
- 4. Flash — write the release image, boot, confirm
eth0/ Wi-Fi up. - 5. MQTT — run the demo agent, point at your broker, see topics live.
- 6. I/O smoke test — toggle a relay, read one RS485 register.